Other Tips - Buffalo WLI-UC-GNHP User Manual

Chapter 5 Trouble Shooting
My link speed is slower than 150 Mbps (Maximum
link speed is only 72Mbps).
The default setting for 150 Mbps mode on many access points is "off' . Enable 150 Mbps mode on
your access point. Also, refer to "AirStation Bandwidth 20/40MHz Select Tool" to turn on 150 Mbps
mode for your AirStation wireless client if necessary.

Other Tips

Issue:
When using the Windows wireless connection manager, I cannot connect to my wireless router. I
receive a "Cannot configure wireless network" error message when scanning for available wireless
networks.
Answer:
Another wireless client software may be installed on your computer that is taking control of the
wireless client adapter away from the Windows connection manager. Either switch to the other
software or use Add/Remove Programs to remove the conflicting client software. After rebooting,
the Windows connection manager should be able to connect to the available wireless networks.
Issue:
When I attempt to connect to my wireless router, I receive an error message indicating that security
settings on my computer are not matching the settings on the router.
Answer:
Consult your network administrator (or your router) for the correct SSID, encryption type, and
encryption key. To manually enter the correct security key and SSID in Windows XP, open Control
Panel and click on Wireless Network Setup Wizard. Step through the wizard, entering the correct SSID
and encryption key.
WLI-UC-GNHP User Manual 60