Using Client Manager 3 With Windows Xp; Opening And Closing Client Manager - Buffalo WLI-UC-GNHP User Manual

Chapter 4 Client Manager

Using Client Manager 3 with Windows XP

Opening and Closing Client Manager

• After installation, Client Manager automatically launches when Windows boots. To launch Client
Manager manually, click "Start" > "All Programs" > "BUFFALO" > "AirStation Utility" > "ClientManager3"
.
• Right click on the Client Manager icon in the system tray and click "Exit" to close Client Manager.
The appearance of the Client Manager icon in the systray will change according to its connection
status:
: Wireless client is not connected to the computer
: No connection to access point
: Transmitting via an access point (encrypted with TKIP/AES)
: Transmitting via an access point (Encrypted with WEP, or not encrypted)
: Transmitting in ad-hoc mode (not supported with this unit)
: Authenticating
WLI-UC-GNHP User Manual 45