Chapter 4
Client Manager
Software Overview
Client Manager is software to manage your wireless connection. See page 10 to install Client
Manager on your computer.
Note:
There are two versions of Client Manager with this unit, "V" and "3".
Client Manager V supports Windows Vista.
Client Manager 3 supports Windows XP.
Using Client Manager V with Windows Vista
Opening and Closing Client Manager
• After installation, Client Manager automatically launches when Windows boots. To load Client
Manager manually, click "Start" > "All Programs" > "BUFFALO" > "AirStation Utility" > "ClientManagerV"
.
• Right click on the Client Manager icon in the system tray and click "Exit" to close Client Manager.
The appearance of the Client Manager icon in the systray will change according to its connection
status:
: Not connected
: Communicating via an access point
WLI-UC-GNHP User Manual
30