Table of Contents
Advertisement
8.2.8
Activate the ECO mode (Optional)
Your telephone is provided with a low-emission mode. ECO mode is activated, as soon as you place the handset
in the base station, the transmission power between handset and base station is reduced to the minimum. This
applies to base with single handset registration only. If more than one handset is registered to the base station, the
ECO mode will not function.
In Idle:
1. Repeat step 1 in section 8.2.1.
2. Press <OK> and <UP/DOWN> to select ECO Mode.
3. Press <OK> to select On to activate ECO mode.
4. Press <OK> to confirm.
8.2.9
Reset the base settings to default settings
After system reset, the phone will return to its original settings.
In Idle:
1. Repeat step 1 in section 8.2.1.
2. Press <OK> and <UP/DOWN> to select System Reset.
3. Press <OK> to enter the 4-digit System PIN.
Note: 4-digit PIN is entered in ****. Once 4 digits are entered, the right soft key will become OK.
4. Press <OK> and <YES> to confirm resetting the base settings to default settings.
The base will restore to default settings and return to standby.
9
DEFAULT SETTINGS
Items
Call List
All Calls or Unanswered Calls Only
New Call Alert
Sound
External Ringer Melody
Internal Ringer Melody
Ringer Volume
Silence
Key Beep Tone
Confirmation Tone
Low Battery Tone
Out of Range Tone
Handset Settings
Direct Call
Contrast
Handset Rename
Wallpaper
Colour Theme
Language
Auto Answer
Base Settings
Ringer Melody
Ringer Volume
Handset Priority
Dial Mode
Flash Time
Default Values
All Calls
On
Melody 1
Melody 2
Level 3
Off
On
On
On
On
Off
Level 5
Empty
Wallpaper 1
Theme 1
Country Dependent
On
Melody 1
Level 2
All Handsets
Tone
Country Dependent
22
Page
Advertisement
Table of Contents
