JVC TV-13143 User Manual page 43

Jvc tv/vcr combo user guide
Table of Contents

Advertisement

5
Set the start time, end time, channel and tape
speed as in step 4.
SET
ENTER
SET
7
To set the timer f or another pr ogram, press the
SET + or – b utton until the position of the
second pr ogram b links, then press the ENTER
button. Repeat steps 4 to 6 to set the second
program.
NOTE:
The VCR section cannot be used while the REC TIMER indicator is lit. If you want to use the VCR
operation, press the TIMER button to deactivate the timer.
After a power failure or disconnection of the power plug, all programmed recording setting and time
display will be lost upon resumption of power. In this case, reset the clock (see pages 14-16.) and
reprogram any timer recordings.
If you want to correct the digits while setting, press the CANCEL button until the item you want to
correct, then press the SET + or – button to correct the desired setting.
TIMER REC SET
DATE
23 (TUE)
7 : 00 PM
START
END
9 : 30 PM
CH
007
SPEED
EP
〈+/—/ENTER/CANCEL/MENU〉
5
5 6
6
Press the ENTER button to accept them.
ENTER
8
Press the TIMER button. The REC TIMER
indicator will light. The Timer is pr ogrammed,
when the pr ogrammed time is reac hed, the
recor ding is automaticall y star ted.
TIMER
To cancel timer recording, press the button again and
REC TIMER indicator will go out.
23 TU
7:00
9:30
007
PM
PM
EP
----- --:--
--:--
--- -
-----
--:-- --:--
--- -
-----
--:-- --:--
--- -
-----
--:-- --:--
--- -
-----
--:-- --:--
--- -
-----
--:-- --:--
--- -
-----
--:-- --:--
--- -
〈+/—/ENTER/CANCEL/MENU〉
8
REC TIMER
41

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tv-13143w

Table of Contents