Draytek Vigor2860 Series User Manual page 114

Open WAN Interface for
this Channel
WAN Connection
Detection
PPPoE/PPPoA Client
MPoA (RFC1483/2684)
Vigor2860 Series User's Guide
environment on some ISPs. Data and IGMP packets
will be transmitted and received with different PVC.
Physical Members – Group the physical ports by checking
the corresponding check box(es) for applying the port-based
bridge connection.
Check the box to enable relating function.
WAN Application - Management can be specified for
general management (Web configuration/telnet/TR069). If
you choose Management, the configuration for this VLAN
will be effective for Web configuration/telnet/TR069.
IPTV - The IPTV configuration will allow the WAN
interface to send IGMP packets to IPTV servers.
Such function allows you to verify whether network
connection is alive or not through ARP Detect or Ping
Detect.
Mode – Choose ARP Detect or Ping Detect for the system
to execute for WAN detection.
Ping IP – If you choose Ping Detect as detection mode, you
have to type IP address in this field for pinging.
TTL (Time to Live) – Displays value for your reference.
TTL value is set by telnet command.
Enter your allocated username, password and authentication
parameters according to the information provided by your
ISP.
ISP Name – Type in the name of your ISP.
Username – Type in the username provided by ISP in this
field. The maximum length of the name you can set is 80
characters.
Password – Type in the password provided by ISP in this
field. The maximum length of the password you can set is
48 characters.
PPP Authentication – Select PAP only or PAP or CHAP
for PPP.
Always On – Check it to keep the network connection
always.
Idle Timeout – Set the timeout for breaking down the
Internet after passing through the time without any action.
Fixed IP – Click Yes to use this function and type in a
fixed IP address in the box of Fixed IP Address.
Obtain an IP address automatically – Click this button to
obtain the IP address automatically.

Router Name – Type in the router name provided by
ISP.

Domain Name – Type in the domain name that you
have assigned.
Specify an IP address – Click this radio button to specify
some data.

IP Address – Type in the private IP address.
104