Bosch ICP-AMAX4-P1 Installation Manual page 56

56 en | Settings
Zone tamper
Zone status report
Unverified alarm
report / cross zone
Domestic no.
Zone Bypass
If this option is enabled, the operator can bypass zones before arming the system. If this
option is disabled, manual bypass of the zone will not be available. After manual bypass of the
zone, a zone bypass report will be sent.
The zone bypass is valid in one arming period only and will be resumed after disarming. Before
disarming, the bypassed zones will ignore all zone triggering and restoration events.
The key switch zone cannot be bypassed.
2014.4 | 01 | F.01U.267.112
3 6 times alarm lockout
4 Alarm duration
0 Disabled
1 Enabled
0 No report required
1 Receiver 1
2 Receiver 2
3 Receiver 3
4 Receiver 4
5 Receiver 1, 2, 3, and 4
6 Receiver 1 (2, 3, and 4 for backup)
7 Receiver 1 (2 for backup) and receiver 3 (4 for backup)
0 Disabled
1 Unverified alarm report
2 Cross zone
3 All
Follow 'alarm report' option's logic. range 0-7
0 No reports allowed
1 Report to destination 1
2 Report to destination 2
3 Report to destination 3
4 Report to destination 4
5 Report to destination 1 ,2, 3, 4
6 Report to destination 1 (where 2, 3, and 4 backup)
7 Report to destination 1 (where 2 Backup) and 3 (where 4
backup)
Installation Guide
AMAX panel 4000 / AMAX panel 4000
Bosch Sicherheitssysteme GmbH
EN