Installation Procedure For Digital Ccis - NEC NEAX 2000 IPS System Manual

INSTALLATION PROCEDURE FOR DIGITAL CCIS

Install the equipment according to the procedures shown below.
For installation of the PBX, refer to the Installation Procedure Manual.
Mounting CCT Card
NOTE: This procedure is not required
when using Built-in SMDR of MP
card in Local Office.

Installation Procedure for Digital CCIS

Page 67
– 64 –
INSTALLATION PROCEDURE FOR DIGITAL CCIS
START
Mounting DTI Card
Mounting CCH Card
Mounting EXPMEM Card
Mounting AP00 Card
Mounting CONN Card
Mounting M10 Card
Selection of PLO in
MP Card
Cable Connection
via MDF
Cable Connection
via CONN Card
Optical Fiber
Connection
END
CHAPTER 2 INSTALLATION
Page 65
Page 66
Page 68
This procedure is required when
expanding the capacity of call
information store memory.
Page 69
This procedure is required when
providing Centralized Billing.
Page 70
This procedure is required when
providing PZ-M542/PZ-M557 card
to connect a coaxial cable for
30DTI card.
Page 73
This procedure is required when
providing PN-M10 card to connect a
optical fiber interface.
Page 74
Page 75
Page 78
This procedure is required when
providing PZ-M542/PZ-M557 card
to connect a coaxial cable for
30DTI card.
Page 80
This procedure is required when
providing PN-M10 card to connect a
optical fiber interface.
NWA-008853-001 Rev.3.0
97ch2001.fm
NOTE