Card Name And Function - NEC NEAX 2000 IPS System Manual

CARD NAME AND FUNCTION

This table shows the circuit card name and function for No. 7 CCIS.
EQUIPMENT FUNCTIONAL
NAME
PN-AP00-B AP00
PN-AP00-D AP00
PN-24CCTA CCT
PN-30CCTA CCT
PN-DTA CCT
PN-24DTA-C DTI
PN-30DTC-C DTI

Card Name and Function

NAME
Application Processor Card
Provides four RS-232C ports, and is used for SMDR, Hotel
Printer, CIS, PMS, MCI functions.
(For PMS function, PN-AP00-B with MRCA program is not
available.)
One card per system.
Application Processor Card
Provides four RS-232C ports, and is used for SMDR, Hotel
Printer, CIS, MCI functions.
One card per system.
CCIS (1.5 Mbps) Trunk Card
Provides a built-in Common Channel Handler (CCH) of No. 7
CCIS.
CCIS (2 Mbps) Trunk Card
Provides a built-in Common Channel Handler (CCH) of No. 7
CCIS.
CCIS (1.5 Mbps/2 Mbps) Trunk Card
Provides a built-in Common Channel Handler (CCH) of No. 7
CCIS.
T1 Digital Trunk Interface (1.5 Mbps) Card
Accommodates 24-channel PCM digital lines.
E1 Digital Trunk Interface (2 Mbps) Card
Accommodates 30-channel PCM digital lines.
CHAPTER 1 GENERAL INFORMATION
FUNCTION
– 17 –
CARD NAME AND FUNCTION
Continued on next page
NWA-008853-001 Rev.3.0
97ch1001.fm
JULY/01/2006