Digital Trunk Data Assignment - NEC NEAX 2000 IPS System Manual

Digital Trunk Data Assignment

START
CM05 Assign an AP number to each DTI/CCT card.
The AP number must match the switch settings
on the DTI/CCT card.
Specify the AP highway channel for the DTI/
CCT card.
CM07 Assign a trunk number to each channel number
on the DTI/CCT card.
NOTE 1:
NOTE 2:
A
DESCRIPTION
For the 30DTI/30CCT, channel No.
00 cannot be used.
The system allocates time slots to
consecutive channels from lowest to
highest channel numbers assigned.
To minimize the number of time slots
allocated, assign trunk numbers to
the consecutive channels on each
card. Never skip channels in CM07.
CHAPTER 3 SYSTEM DATA PROGRAMMING
• Y=0
(1) 04-15, 20-31: AP No.
(2) 09: DTI card
11: CCT card
INITIAL
• Y=1
(1) 04-15, 20-31: AP No.
(2) 0 : Use Expanded Highway channel
INITIAL
1 : Use Basic Highway channel
• Y=01
(1) XX ZZ
XX: 04-15, 20-31: AP No. assigned by
INITIAL
ZZ : Channel No. of DTI/CCT
(2) D000-D254: Trunk No.
Any trunk number already assigned by
CM10/CM14 cannot be used.
Do not assign Trunk No.D255 for CCIS.
– 97 –
DIGITAL CCIS PROGRAMMING
DATA
(128 time slots)
(128 time slots)
CM05 Y=0
00-23: For 24DTI/24CCT
01-31: For 30DTI/30CCT
NWA-008853-001 Rev.3.0
97ch3001.fm