Mounting Circuit Cards - NEC NEAX 2000 IPS Installation Manual

MOUNTING CIRCUIT CARDS

(1) Before mounting the circuit cards, confirm the following items.
• Wrist Strap is connected to Frame Ground.
See CHAPTER 2
• Switch settings of circuit cards are already completed. See CHAPTER 3.
• The "SW1" switches of all PZ-PW121/PZ-PW126 cards are turned off.
(2) Mount circuit cards into their mounting positions according to the "Bay Face Layout" and "Port
Assignment Table" given in the Office Data Programming Manual. See CHAPTER 1
CONDITIONS OF CIRCUIT
This figure shows the mounting method of circuit cards.
"Static Electricity Guard".
CARDS".
Mounting of Circuit Cards
WRIST STRAP
Page 63
Page 45
TO FRAME GROUND CONNECTION
CARD FRONT SIDE
– 275 –
CHAPTER 2 INSTALLATION

MOUNTING CIRCUIT CARDS

ATTENTION
Contents
Static Sensitive
Handling
Precautions Required
Page 289
"MOUNTING
NWA-008841-001 Rev.5.0
90ch2002.fm