Honda 1992 Accord Coupe Owner's Manual page 50

Turn Signals
Push the turn signal lever down to
signal a left turn, and up for a right
turn. The indicator and appropriate
signal lights will blink. The lever will
return automatically to its original
position when the steering wheel is
returned to straight ahead.
For lane changing, you can signal by
pushing the lever part way up or down (to the first stop) and holding
it there; the lever will return to its original position when you release
it. If either turn signal indicator lights up but does not blink, blinks
faster than usual or does not light up at all, check for a burned out
bulb or fuse.
Headlights
Turn the light switch to the first
position ( ) for taillights, side
marker lights, position lights, license
plate lights, and instrument panel
lights. Turn to the second position
( ) to add the headlights.
If the driver's door is opened when the light switch is turned to
either " o n " position, a chime will sound to remind you to turn off
your lights.
High Beam/Low Beam Switch
The headlights may be switched
between low beam and high beam
by pulling the turn signal lever
toward you. The blue high beam
indicator light will be on when the
high beam is on.
Headlight Flasher
To flash the headlights, pull lightly on the turn signal lever and
release.
RIGHT TURN
FIRST
STOP
LEFT TURN
FIRST POSITION
Turn
SECOND POSITION
Pull and release
Lights
(cont'd)