Honda 1992 Accord Coupe Owner's Manual page 142

Follow tire changing preparations and procedures carefully to
reduce the possibility of injury. The jack is designed for changing
tires only. STAND CLEAR, DO NOT get under the car and DO NOT
run the engine when the car is supported only by the jack.
7. Place the jack under the car as shown and raise the car by turning
the handle clockwise until the tire is slightly off the ground.
To reduce the possibility of injury, be sure to use the jack provided
with the car and the correct jacking points; never use any other
part of the car for jack support.
8. Remove the lug nuts and wheel.
(US: DX/LX, Canada: EX)
Remove the lug nuts, wheel cover, and wheel.
JACK HANDLE EXTENSION
LUG WRENCH/JACK HANDLE
VALVE
WHEEL COVER
LUG NUT
(cont'd)