Epson Stylus Pro 4000 Field Repair Manual page 165

Hide thumbs Also See for Stylus Pro 4000:
Table of Contents

Advertisement

Stylus Pro 4000 Field Repair Guide
3. Press and hold the Left, Down, and
4. Using the
Down
5. Using the
Down
6. The Printer's LCD will display
7. Press the
Menu
7.1 The Printer's LCD will display
7.2 The Printer's LCD will display
8. Place a.65mm feeler gauge on the Platen as shown.
1. Slide the Carriage Assembly towards the feeler
gauge.
2. Increase the Platen / Print Head gap by depressing the
Up Arrow
3. Continue to increase the gap until the Print Head clears
the.65mm feeler gauge.
4. Increase the Platen Gap Offset Value be 3 more steps
than determined in step 3.
Platen Gap Adjustment
Up
button, navigate to
Self Testing: Adjustment:
button, navigate to
ADJ: PG ADJ:
[ENTER]
button to start the procedure.
Detecting
PG Offset *(nn)
Printer Component,
buttons, and turn on the Printer (Maintenance Mode 2).
and press the
Start.
Origin.
(*nn = the current Platen Gap Offset).
Software Item,
LCD Display,
Printer Button
and press the
Menu
Menu
button.
4/28/05
button.
Page 165.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents