Headlight Beam Adjustment; Headlight Bulb Replacement - Yamaha YFM250XL(C) Service Manual

FUSE INSPECTION/HEADLIGHT BEAM ADJUSTMENT/
3

HEADLIGHT BULB REPLACEMENT

4.Replace:
**********************************
Blown fuse replacement steps:
**********************************
5.Install:

HEADLIGHT BEAM ADJUSTMENT

1.Adjust:
Higher
Lower
HEADLIGHT BULB REPLACEMENT
1.Disconnect:
2.Remove:
3.Pull back the bulb cover 1.
4.Remove:
NOTE:
Hold the head light on the front side while
removing the bulb socket.
3 - 42
Blown fuse
Turn off ignition and the circuit.
Install a new fuse of proper amperage.
Turn on the switches and see if the electri-
cal device operates.
Fuse interrupts the circuit again' Check
electrical system.
Refer to "CHAPTER 8. ELECTRICAL" for
further information.
Fuse cover
Seat
Refer to the "REAR FENDER-Installation"
section.
Headlight beam (vertically)
Vertical adjustment
Turn the adjusting screw
1 clockwise.
Turn the adjusting screw
1 counterclockwise.
Headlight lead couplers 1
Headlight unit 2
Bulb holder 2
While pushing the bulb holder 2, turn it
counterclockwise.
INSP
ADJ