Caliper Disassembly - Yamaha YFM250XL(C) Service Manual

a
FRONT BRAKE
7.Install:
Retaining bolts
Front brake caliper
Retaining bolt:
18 Nm (1.8 m • kg, 13 ft • lb)
Bolt (front brake caliper):
30 Nm (3.0 m • kg, 22 ft • lb)
8.Install:
Front wheel
9.Inspect:
Brake fluid level
Refer to "FRONT BRAKE FLUID LEVEL
INSPECTION".
a "LOWER" level line
10.Check:
Brake lever operation
A soft or spongy feeling → Bleed brake sys-
tem.
Refer to "AIR BLEEDING (HYDRAULIC
BRAKE SYSTEM)".

CALIPER DISASSEMBLY

NOTE:
Before disassembling the front brake caliper,
drain the brake hose, master cylinder, brake
caliper and reservoir tank of their brake fluid.
1.Remove:
Front wheel
2.Loosen:
Union bolt
Retaining bolts
Retaining bolt (caliper bracket)
3.Remove:
Front brake caliper
Retaining bolts
Brake pads
(with pad shim)
Pad spring
Refer to "BRAKE PAD REPLACEMENT".
– 26 –
CHAS