Recoil Starter - Yamaha YFM250XL(C) Service Manual

ENGINE DISASSEMBLY
2.Remove:
Valve cotters 1
NOTE:
Attach the Valve Spring Compressor 2
between the valve spring seat and cylinder
head to remove the valve cotters.
Valve spring compressor:
P/N. YM-04019, 90890-04019
3.Remove:
Valve spring seat 1 (upper)
Valve spring 2 (outer)
Valve spring 3 (inner)
Valve 4
Valve stem seal 5
Valve spring seat 6 (lower)
NOTE:
Identify each part position very carefully so
that it can be reinstalled in its original place.

RECOIL STARTER

1.Remove:
Cap 1
Starter handle 2
NOTE:
Before untying knot 3, pull out the rope
long enough to make knot 4 on the rope so
that the rope is not pulled into the case.
2.Remove:
Bolt 1
Drive plate 2
Spring 3
Circlip 4
Drive pawl 5
Spring (drive pawl) 6
3.Remove:
Starter spring 1
Starter spring case 2
Sheave drum 3
Plate 4
4 - 19
ENG
4