Final Drive Gear Oil Replacement - Yamaha YFM250XL(C) Service Manual

3
FINAL DRIVE GEAR OIL LEVEL INSPECTION/

FINAL DRIVE GEAR OIL REPLACEMENT

If the oil level is low, add the recom-
mended oil up to the specified level. Refer
to "FINAL DRIVE GEAR OIL REPLACE-
MENT" section.
Inspect the copper washer for damage. If
damaged, replace it
Install the copper washer and filler bolt.
NOTE:
Before installing the filler bolt, do not for-
get to fit the copper washer.
After installing the filler bolt, inspect the
oil leaks.
Filler bolt (final drive gear case):
23 Nm (2.3 m • kg, 17 ft • lb)
**********************************
FINAL DRIVE GEAR OIL REPLACEMENT
1.Place the machine on a level place.
2.Place an oil pan under the final drive gear
case.
3.Remove:
Final gear case protector
Filler bolt (final drive gear case)
Drain plug 1 (gear case)
Drain the final drive gear oil.
4.Inspect:
Copper washer (filler bolt)
Copper washer (drain plug)
Damage → Replace.
5.Install:
Drain plug (final drive gear case)
Drain plug (final drive gear case):
23 Nm (2.3 m • kg, 17 ft • lb)
6.Fill:
Final drive gear case
CAUTION:
Do not allow foreign material to enter the
final drive gear case.
3 - 30
INSP
ADJ