Makita LB1200F Instruction Manual page 15

Guide bearing
Bolt A
Guide bearing distance
from bottom of blade
1 - 2 mm
Bolt C
Bearing holder
Thrust bearing
Bolt A
Blade
1. Loosen bolt C, and adjust bearing holder, so that guide bearing is positioned 1 or
2 mm from bottom of blade.
2. Loosen bolt A, and adjust thrust bearing to a position of 0.5 mm from rear of
blade.
3. Loosen bolt B, and adjust guide bearing to a position 0.5 mm away from blade.
0.5 mm
0.5 mm
Bolt B
Guide bearing
15