Removing The Microsd Card - Motorola MC9500-K User Manual

1 - 10 MC9500-K Mobile Computer User Guide
Removing the Battery
Figure 1-12
Lift the battery from the MC9500-K.
6.
Insert the replacement battery, top first, into the battery compartment in the back of the MC9500-K.
7.
Press the battery down until the battery release latches snap into place.
8.
The MC9500-K powers up after inserting the battery.

Removing the microSD Card

To remove an microSD card:
CAUTION
NOTE On devices with OEM version 01.19.11 and higher, a dialog box appears when pressing the Power button. See
Removing the Battery on page D-18
If the MC9500-K is in suspend mode, press the red Power button to wake the device.
1.
Press the red Power button to suspend the MC9500-K.
2.
Wait for red Decode LED to turn on and then turn off.
3.
Unhook the handstrap.
4.
Remove the battery.
5.
Remove the SD card cover.
6.
Slide the SD card holder door to the left to unlock.
7.
Lift the microSD card holder door.
8.
Remove microSD card from holder.
9.
Close the microSD card holder door.
10.
Slide the microSD card holder door to the right to lock into place.
11.
Align the SD card cover over the access hole and press down until it snaps into place.
12.
Replace the battery.
13.
Battery Latch
Suspend the MC9500-K prior to removing the battery. Failure to properly remove the battery may cause
the MC9500-K to cold boot and potential loss of data.
for more information.