Installing The Battery; Charging The Battery - Motorola MC9500-K User Manual

Install the battery.
7.
After completing initial MC9596 setup or after replacing a SIM card:
8.
Press the red Power button.
a.
On the Today screen, tap Wireless Manager.
b.
Ensure Phone is on.
c.
Press the red Power button to suspend the MC9596.
d.
Perform a warm boot. See
e.
Make a call to verify cellular connection.
f.
NOTE For detailed information about WWAN activation and settings, refer to the MC9500-K Series Mobile Computer
Integrator Guide.

Installing the Battery

To install the battery:
Insert the battery, top first, into the battery compartment.
1.
Press the battery down into the battery compartment until the battery release latches snap into place.
2.
Battery
Inserting the Battery
Figure 1-11
The MC9500-K powers up automatically after inserting the battery, if the battery has been charged previously.
3.

Charging the Battery

Ensure that you follow the guidelines for battery safety described in
CAUTION
Before using the MC9500-K for the first time, charge the battery using either a charging cable or a cradle:
For cable and cradle setup and charging procedures refer to the MC9500-K Series Mobile
NOTE
Computer Integrator Guide.
USB Charging Cable
•
Charge Only Cable
•
Single Bay USB Cradle
•
Resetting the MC9500-K on page
Battery Release Latch
Getting Started
3-3.
Battery Release Latch
Battery Safety Guidelines on page
1 - 7
9-2.