7 - 30 MC9500-K Mobile Computer User Guide
Hands-free Services
To connect to a Bluetooth headset:
Newer Bluetooth headsets are device dependant and remember the last device they connected to. If problems
NOTE
occur while connecting to the headset, place the headset in discovery mode. Refer to the headset user manual
for more information.
Only WAN audio is routed to the headset. System audio is still emitted through the MC9500-K speaker.
You can accept calls and re-dial using the Hands-free profile.
Hands-free profile does not support 3-way calling.
Ensure the MC9500-K is connectable (required when automatic re-connect is initiated). See
1.
on page
7-36.
Ensure that the Hands Free profile is enabled on the MC9500-K. See
2.
information.
Use the Connection Wizard to search for a Bluetooth hands-free headset.
3.
Select the hand-free device and tap Next.
4.
Select the Hands-free service name and select Connect. The MC9500-K connects to the headset. Refer to
5.
the headset user manual for instructions on communicating with a Bluetooth device.
During an active connection, the MC9500-K cannot go into suspend mode when the Power Button is pressed.
6.
A message appears notifying the user.
Once the WAN call is disconnected (with Hands-free profile) the Power button is enabled.
WWAN Bluetooth Audio Notification Dialog Box
Figure 7-33
Serial Port Services
Use the wireless Bluetooth serial port connection as you would a physical serial cable connection. Configure the
application that will use the connection to the correct serial port.
To establish a serial port connection:
Use the Connection Wizard to search for a Bluetooth serial device.
1.
Select the device and tap Next. The Connection Favorite Options window appears.
2.
Headset icon
Device Info Tab
Profiles Tab on page 7-47
for more