Getting Started; Installing A Microsd Card; Version 1 - Motorola MC9500-K User Manual

Getting Started

To start using the MC9500-K for the first time:
Install a microSD card (optional)
•
Install the SIM card (MC9596 only)
•
Install the battery.
•
Charge the MC9500-K.
•

Installing a microSD Card

The microSD card slot provides secondary non-volatile storage. The slot is located under the battery pack. Refer to
the documentation provided with the card for more information, and follow the manufacturer's recommendations for
use.
CAUTION
NOTE The MC9500-K was manufactured with two types of microSD card holders.
In Version 1, the microSD card is placed in the holder door and the door closed and locked into place.
In Version 2, the microSD card is placed face down on the holder contacts and the door closed and locked into
place.

Version 1

To install the microSD card:
Remove the SD card cover using flathead screwdriver.
1.
SD Card Cover Removal
Figure 1-2
Slide the microSD card holder door to the left to open.
2.
Lift microSD card holder door.
3.
Follow proper ESD precautions to avoid damaging the microSD card. Proper ESD precautions include,
but are not limited to, working on an ESD mat and ensuring that the operator is properly grounded.
SD Card Cover
Flathead Screwdriver
Getting Started 1 - 3