Dell 3110cn Service Manual page 48

Problem Error Message
CRUM ID
009-371
Flip
Reseat
Belt Unit
Ready to Print
094-422
Flip
Belt Unit
Is close to
Flip
Belt
Life
Insert Belt Unit
094-910
Flip
Insert
Belt Unit
Belt Unit
094-911
Flip
Replace
Belt Unit
010-351
Restart Printer
Flip
Reseat Fuser
Contact Support
010-359
Restart Printer
Fuser
Flip
Reseat Fuser
Contact Support
Ready to Print
010-421
Flip
Replace Fuser
Soon
Tray Detached
024-946, 024-947
Flip
Push In
Tray N
NOTE:
024-946: Tray 1
Tray
024-947: Tray 2
N: Tray number
Load Tray 1
077-912
Flip
Push In
Tray 1
Version 4 2008.01.17
Error Contents
<IOT Belt Unit CRUM ID Error>
The Belt Unit CRUM ID error is detected.
The Belt Unit CRUM ID read by the sensor is
different from the one that was recorded.
<IOT Belt Unit Life Warning>
The Belt Unit Counter is going to reach the
replacement time.
<IOT Belt Unit Detached>
The Belt Unit Detached is detected.
<IOT Belt Unit Life Over>
The Belt Unit Counter has reached the replacement
time.
<IOT Fuser Life Over>
The Fuser Counter has reached the replacement
time.
<IOT Fuser CRUM ID Error>
The Fuser CRUM ID error is detected.
The Fuser CRUM ID read by the sensor is different
from the one that was recorded.
<IOT Fuser Life Warning>
The Fuser Counter is going to reach the
replacement time.
<IOT Tray Detached>
The paper cassette is detached.
The Tray Size Switch detected the no tray.
<Upper Cassette Detached>
The Tray 1 paper cassette is detached when the tray
2 is specified.
The Tray Size Switch detected the no tray.
Chapter 1 Troubleshooting
FIP to be
referred
FIP-1. 49
FIP-1. 50
FIP-1. 49
FIP-1. 51
FIP-1. 17
FIP-1. 52
FIP-1. 53
FIP-1. 54
FIP-1. 54