Dell 3110cn Service Manual page 397

Replacement 29 FRONT COVER (PL1.2.98)
NOTE
When performing the step below, route the HARNESS ASSY OPEPANE over the HAR-
NESS ASSY FRONT COVER.
5) Route the HARNESS ASSY OPEPANE and the HARNESS ASSY FRONT COVER along the
DUCT DRV PH.
6) Engage the connector (P/J272) of the HARNESS ASSY FRONT COVER and the connector (P/
J2900) of the HARNESS ASSY OPEPANE.
7) Secure the ground wire of the HARNESS ASSY FRONT COVER to the printer using the one
screw (silver, tap, 8mm).
Go to the next replacement step:
Replacement 33 RIGHT COVER (PL1.1.6)
Version 3 2007.03.15
Chapter 3 Removal and Replacement Procedures (RRPs)
5)
HARNESS ASSY OPEPANE
HARNESS ASSY FRONT COVER
3 - 123
6)
7)
Kmy03086KC