Casio QT-6000 Reference Manual page 60

Application System
Calculating the total wages of the employees per hour
Flow of Time & Attendance operation
2-10-2. Clock-in operation
This function is used to register the Starting work time.
2-10-2-1. Clock-in operation (1)
Program: Not using the window and impossible to specify job code.
Allow to specify job code = NO, Display job code window = NO
(Refer to the page 54 of the programming manual.)
Operation
REG 10-10-01 11:59 AM 001234
GLENN DEAL
Clock-in OK?
R-60
Time zone
Zone 1 Cycle 1
Zone 1 Cycle 2
Zone 1 Cycle 3
Zone 2 Cycle 1
Zone 2 Cycle 2
The following flow shows the order of time & Attendance function by pressing the
specified keys: It is possible to specify one key as both <CLOCK-IN> and <CLOCK-
OUT> function, or specify two keys separately. ( Refer to "4-3-7-33 Worksheet for clock-
in/clock-out" in the programming manual for details.)
(
→
CLOCK-IN BREAK-IN
11:59 AM
0.00
Hourly/Labor
Totalizer 1
Totalizer 2
Totalizer 3
Totalizer 4
Totalizer 5
→
BREAK-OUT
1. XXXXXX <CLOCK-IN>
When this message appears, press the <YES> key to register
the start of working hours.
XXXXXX
Employee No.
)
→
CLOCK-OUT