Panasonic KX-NCP0158 Quick Installation Manual page 32

4 Before Site Survey
Setting and Installing the CS Temporarily for Site Survey
1.
Switch the Radio Signal Test switch from OFF to ON.
2.
Set the channel number switches as desired.
Channel 0
1
2
3
4
Note
•
If more than one CS is in Radio Signal Test mode, each CS must have a unique channel number.
•
For details about the Initialized Mode Switch, refer to "13 Initializing the IP Cell Station".
3.
After setting the DIP switches, connect the CS to an AC adaptor, battery, PoE hub, or PoE adaptor.
[Connecting the AC Adaptor]
WARNING
When installing or testing a product with an external AC adaptor, the AC adaptor should be
plugged into a wall outlet or floor-mounted AC outlet. Do not connect the AC adaptor to a
ceiling-mounted AC outlet, as the weight of the adaptor may cause it to become disconnected.
32 Quick Installation Guide
Channel 1 Channel 2 Channel 3 Channel 4
1 1 1
2 2 2
3 3 3
4 4 4
DIP Switch
OFF ON
1
2
Channel Number Switch
3
4
Keep this switch at the default
5 "OFF" position. Otherwise, the
CS will not function.
6
Radio Signal Test Switch
7
Fixed IP Setting Mode Switch
8
Initialized Mode Switch
1
2
3
4
Document Version 2009-12