No Answer (Enable Call Forward) - Panasonic KX-UDS124 Administrator's Manual

2.6.4 Call Control [Line 1–2]
Busy (Phone Number)
Description
Value Range
Default Value

No Answer (Enable Call Forward)

Description
Value Range
Default Value
122 Administrator Guide
Specifies the phone number of the destination to forward calls to when
the line is in use.
Note
•
If you change this setting when [Synchronize Do Not Disturb
and Call Forward] is set to [Yes], the change to this setting is
not immediately applied on this screen. In this case, reload the
screen to confirm that the change is applied.
Max. 32 characters
Note
•
You cannot leave this field empty if [Busy (Enable Call
Forward)] is set to [Yes].
Not stored.
Selects whether to forward incoming calls to a specified destination
when a call is not answered after it has rung a specified number of
times.
Note
•
If Do Not Disturb has been enabled on the server, the server
rejects incoming calls and the SIP-CS does not receive any
calls, even if you have selected [Yes] for this setting.
•
If you have selected [Yes] for this setting and Call Forward has
been enabled on the server, but the forwarding destinations
differ, incoming calls are forwarded to the destination set on the
server.
•
If Call Forward has been enabled on the server, incoming calls
are forwarded to the destination set on the server, even if you
have selected [No] for this setting.
•
You can synchronize the Do Not Disturb and Call Forward from
the Web user interface (® see [Synchronize Do Not Disturb
and Call Forward] in 2.6.4.3 Call Control) or through
configuration file programming (® see
"FWD_DND_SYNCHRO_ENABLE_PSy_n" in 4.6.1 Call Control
Settings).
•
If you change this setting when [Synchronize Do Not Disturb
and Call Forward] is set to [Yes], the change to this setting is
not immediately applied on this screen. In this case, reload the
screen to confirm that the change is applied.
•
Yes
•
No
No
Document Version 2013-03