Page 2
USER MANUAL FOR YOUR BAUMATIC BCI7030 Combi fridge/freezer NOTE : This User Instruction Manual contains important information, including safety & installation points, which will enable you to get the most out of your appliance. Please keep it in a safe place so that it is easily available for future reference, for you or any person not familiar with the operation of the appliance.
Product and aperture dimensions Product specifications 7 - 8 Description of your appliance Description of the product features Using your Baumatic combi fridge freezer 11-12 Before switching on During first use Turning on the appliance and setting the thermostat Arranging and storing food in the fridge section...
Environmental note Note : Before discarding an old appliance, switch off and disconnect it from the power supply. Cut off and render any plug useless. Cut the cable off directly behind the appliance to prevent misuse. This should be undertaken by a competent person. Disable the door lock to make sure that children cannot get stuck inside the appliance.
Important safety information Your safety is of the utmost importance to Baumatic. Please make sure that you read this instruction booklet before attempting to install or use the appliance. If you are unsure of any of the information contained in this booklet, please contact the Baumatic Customer Care Department.
Page 6
Do not place electrical devices inside of the appliance, such as mixers and electric ice cream makers. Service You should not attempt to repair the appliance yourself, as this could cause injury or a more serious malfunction. If you require a service call then please contact the Baumatic Service Department.
Specifications of your combi fridge freezer Product dimensions Height: 1772 mm Width: 540 mm Depth: 535 mm Aperture dimensions Height: 1772-1776 mm Width: 560 mm Depth: 550 mm Product specifications o Total gross / net capacity: 281 / 263 litres o Gross capacity fridge / freezer: 206 / 75 litres o Net capacity fridge / freezer: 203 / 60 litres o Freezing capacity: 3 kg / 24 hours...
Page 8
o 1 x Salad crisper o 1 x Meat drawer o 1 x Bottle rack o 1 x Egg rack o 3 x General door shelves o **** freezer compartment o Freezer section with water drainage system o 3 x Transparent freezer drawers o Reversible doors o Slider fittings Energy efficiency class...
Description of the product features 1) Shelves o The shelves may be placed in any of the guide slots within the interior of the appliance. They are protected from sliding out. o To remove a shelf: Take off all of the items that are stored on the shelf that you want to remove.
Using your Baumatic combi fridge freezer Before switching on o Make sure that it has been installed by a suitably qualified person, information contained Baumatic’s installation instructions. o After delivery, wait for eight hours before connecting the appliance to your mains supply. This will allow any refrigerant gasses that may have been disturbed during the transportation process to settle.
Turning on the appliance and setting the thermostat You switch on your appliance by connecting it to your mains supply and setting the thermostat. o The thermostat automatically regulates the temperature inside the appliance, depending on what number you have turned the thermostat control knob to.
Arranging and storing food in the fridge section o Warm food or evaporating liquids should not be stored in your refrigerator, as this will increase the humidity inside of the appliance. o All foods should be wrapped or covered, this is particularly important if the food has a strong flavour.
o Milk bottles should have a cap on them and be stored on the bottle shelf that sits in the door. o Garlic, potatoes, onions and bananas should only be stored in a refrigerator IF they are stored in airtight containers.
o Fresh food should be packed into airtight containers or packaging. This will help to make sure that the food doesn’t dry out or lose its flavour. It will also ensure that flavour does not transfer from other foods. o The food should be placed on the freezer compartment’s base.
Saving energy when using your fridge-freezer There are some simple things you can do to save energy when installing or using your fridge-freezer: Installing: o Install the appliance in a cool position. If it is placed in direct sunlight or next to an oven or other heat source, the energy consumption can increase substantially.
o The freezer compartment should operate at around -18 degrees Celsius. The refrigerator compartment should operate at around 3 to 4 degrees Celsius. o Allow food to sufficiently cool before putting it in the appliance (but do not let it sit at room temperature for too long). o In the freezer compartment, food packages should be scattered and never grouped or stacked together until they are completely frozen.
o Do not use abrasive products, detergents or soaps. o After washing the appliance, wipe over the area that you have cleaned with a damp cloth and then dry it thoroughly. o When cleaning is complete, dry your hands and then reconnect the plug to your mains supply.
Page 19
o The day before you defrost, the thermostat should be turned to its maximum temperature setting. This will make sure that the food contained in the compartment is frozen properly. o Whilst defrosting the appliance, the food should be removed from the compartment and wrapped in several layers of paper and stored in a cool place.
o Once all the ice that has built up has melted, then the inside of the freezer compartment should be dried thoroughly. Failure to do this will result in immediate ice build when the appliance is turned back on. o With dry hands, reconnect your appliance to your mains supply. Set the thermostat knob back to its maximum position for a 24 hour period, before switching it to its normal position of <3>...
o Re-fit the cover and plug in the appliance. Installation IMPORTANT: Before installation usage, read all the instructions and make sure that the voltage (V) and the frequency (Hz) indicated on the rating plate are exactly the same as the voltage and frequency in your home.
The blue wire must be connected to the terminal marked “N” (neutral), or coloured black. The green and yellow wire must be connected to the terminal marked “E” (earth), or by the earth symbol, or coloured green and yellow. o When the connection is completed, no stray strands or cut wire should be present.
Reversing the doors of your appliance The doors of your fridge freezer can be set to open from the left or the right. If you want the doors to be hinged on the left hand side and opening from the right hand side, you will need to follow the door reversal process.
Page 24
o Remove the pin of the bottom right-hand hinge and remount it on the bottom left-hand hinge. o Invert the plate cover of the cabinet mounted on the plate. o Reassemble hinges and doors working from the bottom to the top 1 IMPORTANT: Check that both the upper and lower doors open and shut correctly, without fouling, after you have completed the door reversal process.
THE DOOR SEAL, WHICH WOULD NOT BE RECTIFIED UNDER THE GUARANTEE FREE OF CHARGE. IMPORTANT: WHEN YOU HAVE REVERSED THE DOORS OF THE APPLIANCE; AS YOU HAVE PLACED THE APPLIANCE ON ITS SIDE, YOU MUST WAIT FOR 8 HOURS BEFORE SWITCHING THE APPLIANCE BACK ON.
Page 26
IMPORTANT: The appliance aperture MUST have a minimum of 200 cm² free air flow for ventilation.
o The diagram on the left shows minimum gap which should left between the top of the housing unit and the ceiling to allow sufficient ventilation. Installing your fridge freezer o Fasten the gasket provided with the appliance on the opposite side of the hinges.
Page 28
o Make sure the top connecting plate of the cabinet fits perfectly in the plate. o Fasten the top part of the appliance to the cabinet using the screws provided. o Fasten the bottom part of the appliance by means of the screws provided.
o Screw the plate to the column by means of the screws provided. o Tighten the fixing screws of the central right-hand hinge. o Perform the same operations on the central left-hand plate. Door slider fittings The appliance is equipped with coupling devices for the appliance doors with the panels of the column.
Troubleshooting IMPORTANT: If your fridge freezer appears not to be operating properly, before contacting the Baumatic Customer Care Department, please refer to the checklist below. My fridge freezer does not appear to be working/there is no power to my appliance.
Page 31
o Ensure that the door is closing properly and that the door has not been opened for a prolonged period in error. o Ensure that there is adequate ventilation for your appliance. My fridge freezer is noisy o The refrigerant gas that circulates the pipe work of the appliance may make a slight noise, even if the compressor is not running.
Page 32
Baumatic Ltd. has been completed. Please refer to the conditions of guarantee that appear on the...
BC005 Stainless Steel Cleaner and Protector (250 ml) o BC007 E-Cloth – General Purpose Cloth o BC008 Microwave Cover To order a Baumatic consumable product please call 0123 5437 244 and quote the product code. You can also order online from eshop.baumatic.co.uk...
Technical Data Manufacturer BAUMATIC LTD Model Number BCI7030 Product Category 7 – Refrigerator-Freezer Energy Efficiency Class (1) Annual Energy Consumption (2) 283 kWh Storage Volume of Fridge 203 litres Compartment Storage Volume of Freezer 60 litres Compartment Star Rating Frost Free Compartments...