Program Reporter - Honeywell LYNX Touch SIA Manual

Screen Display
Button Key * - Zone *

Program Reporter

Reporter
Primary CS Info
Phone Type
Contact Id: 4 Digit
Communicator Type
None
Phone Number
Account Number
FFFF
Dynamic Priority
Dynamic Delay
Report All
Press to Report All
Report Alarms
Enabled
Report Troubles
Enabled
Report Open/Close
Disabled
Function & Programming Options
Button Key * Zn *
Enter a function for each button key from the following options:
Disarm
Arm Stay
24 Hour Silent
24 Hour Auxiliary
Fire No Verification
* Options are the same for each Button/Zone combination.
Reporter
Program the following options:
Primary CS Info
Follow Me Phone 1
Report Selection
Downloader
Primary Central Station Information
Phone Type
Communicator Type
Phone Type
None
Contact Id : 4 Digit
Contact Id : 10 Digit
SIA
Note: If SIA, Contact Id: 4 Digit, or Contact Id: 10 Digit is selected the Phone Number and Account
Number options will be displayed.
Communicator Type
None
GSM
WiFi
WiFi & GSM
IP
Note: If IP is selected the Dynamic Priority option will be displayed.
Phone Number
Enter the Primary Central Station Phone Number (Up to 20 digits)
Account Number
Enter the Primary Central Station Account Number
Dynamic Priority
Redundant Reports
Preferred Telco
Preferred Radio
Note: If Preferred Telco or Preferred Radio is selected the Dynamic Delay option will be displayed.
Dynamic Delay
15 Seconds
30 Seconds
60 Seconds
90 Seconds
Report All
Press to Report All
Report All Set
Report Alarms
Disabled
Enabled
Report Troubles
Disabled
Enabled
Report Open/Close
Disabled
Enabled
Arm Away
No Response
24 Hour Audible
Silent Burglary
Secondary CS Info
Follow Me Phone 2
Options
- 9 -