Troubleshooting - Baumatic TITAN5 Instruction Manual

o Connect the other end into the plastic adaptor. Screw the
adaptor onto a suitable ½" BSP water outlet connector.
o Fully open the water tap that the inlet hose is connected to.
Check that all of the water pipe joints are secure and that there
are no leaks.
Using the water dispenser for the first time
o Press the water dispenser pad for 1 minute several times.
o IMPORTANT: DO NOT press the water dispenser pad for longer
than 1 minute, otherwise it may cause a malfunction.
o After a few minutes, water will begin to flow from the inlet.
o Run the water dispenser for 3 – 5 minutes, at 1 minute intervals,
to flush out the water tank.
Using the ice maker for the first time
o After the appliance is connected to your electric supply and
starts to cool. When the temperature reaches -15°C, the ice
maker will begin to produce ice.
o IMPORTANT: Discard all ice that is produced in the 24
hour period after the ice starts to dispense.

Troubleshooting

IMPORTANT: If your fridge freezer appears not to be
operating properly, before contacting the Baumatic
Customer Care Department, please refer to the
checklist on the next 4 pages.
46