Table of Contents
Advertisement
Quick Links
208414, 208415 Replacement Power Supply
APPLICATION
These kits replace the power supplies with W8600E solid-
state performance indicators (SSPI) used in the F50F and
F58F Electronic Air Cleaners. See Table 1.
NOTE: The W8600E Remote Performance Indicator
driver circuit board has been calibrated with the
power supply in this kit. False wash indications
will occur if used with a different power supply.
F50F
120 Vac, 60 Hz
220/240 Vac,
50/60 Hz
F58F
120 Vac, 60 Hz
INSTALLATION
When Installing this Product...
1. Read these instructions carefully. Failure to follow
them could damage the product or cause a hazard-
ous condition such as electrical shock.
2. Check the ratings given in the instructions and on
the product to make sure the product is suitable for
your application.
3. Installer must be a trained, experienced service
technician.
4. After installation is complete, check out product
operation as provided in these instructions.
®U.S. Registered Trademark
Copyright © 1997 Honeywell Inc. • All Rights Reserved
Kit for Electronic Air Cleaner
Table 1. Power Supply Replacement Guide.
Nominal Size
(in.)
(mm)
16 x 20
406 x 508
16 x 25
406 x 635
20 x 20
508 x 508
20 x 25
508 x 635
20 x 12-1/2
508 x 318
20 x 12-1/2
508 x 318
20 x 25
508 x 635
INSTALLATION INSTRUCTIONS
NOTE: Use the 120 Vac replacement power supply
indicated in Table 1 when servicing the F50F or
F58F electronic air cleaners which have been
modified with the 203365A transformer kit to
operate at 220/240 Vac.
Ionizer Current
(mA)
1.33
1.65
1.65
2.10
1.05
1.05
2.10
WARNING
ELECTRIC SHOCK HAZARD. SAFETY HAZARD.
CAN CAUSE ELECTRICAL SHOCK OR
EQUIPMENT DAMAGE
Disconnect power before removing old power
supply board and installing replacement power
supply board.
To Remove Old Power Supply Board
NOTE: It is advisable to observe the location of
leadwires to be replaced on the power supply.
Tag the leadwires as they are removed to help
you correctly reconnect them.
Open access door. See Fig. 1.
Open power box.
X-XX UL
Replacement Power Supply
(OS No.)
208414G
208414B
208414B
208414A
208414C
208415C
208414A
69-1136-1
Advertisement
Table of Contents
Troubleshooting
Related Manuals for Honeywell 208414
Summary of Contents for Honeywell 208414
- Page 1 Tag the leadwires as they are removed to help you correctly reconnect them. Open access door. See Fig. 1. Open power box. ®U.S. Registered Trademark 69-1136-1 Copyright © 1997 Honeywell Inc. • All Rights Reserved X-XX UL...
-
Page 2: Install New Power Supply
208414, 208415 REPLACEMENT POWER SUPPLY KIT FOR ELECTRONIC AIR CLEANER Install New Power Supply REMOVING COVER When replacing the power supply, reuse the remain- FROM POWER BOX. ing leadwires in the air cleaner when removing the old power supply. Install W8600E terminal block and wiring supplied with this kit using screws previously removed. - Page 3 208414, 208415 REPLACEMENT POWER SUPPLY KIT FOR ELECTRONIC AIR CLEANER INTERNAL SCHEMATIC FOR ELECTRONIC AIR CLEANER WITH W8600E. BLACK COLLECTOR TEST RED IONIZER BUTTON CONTACT BOARD BLACK BLACK POWER SUPPLY BLACK ORANGE GREEN GRAY TERMINAL STRIP FRONT BACK BROWN VIOLET...
-
Page 4: Troubleshooting And Service
208414, 208415 REPLACEMENT POWER SUPPLY KIT FOR ELECTRONIC AIR CLEANER BLACK COLLECTOR TEST RED IONIZER BUTTON BLACK CONTACT BOARD BLACK BLACK E5 E6 BROWN E4 E3 BLACK BLUE ORANGE GRAY YELLOW VIOLET GREEN BLACK BLACK BLACK W4 W2 W1 W3 1 INTERLOCK SWITCH. -
Page 5: Power Supply
208414, 208415 REPLACEMENT POWER SUPPLY KIT FOR ELECTRONIC AIR CLEANER The solid state power supply assembly has no field Check Led (Air Cleaners With W8600E) serviceable components. If troubleshooting indicates a The CHECK LED is on the W8600E. It lights to indicate... -
Page 6: Modification To Reduce Ozone Odor
208414, 208415 REPLACEMENT POWER SUPPLY KIT FOR ELECTRONIC AIR CLEANER 1. Install an activated carbon filter downstream from Modification To Reduce Ozone Odor the air cleaner. Make sure particles from the air filter cannot fall into the air cleaner. WARNING WARNING ELECTRIC SHOCK HAZARD. -
Page 7: Limited Two-Year Warranty
Plymouth, MN 55441-4437 This warranty does not cover removal or reinstallation costs. This warranty shall not apply if it is shown by Honeywell that the defect or malfunction was caused by damage that occurred while the product was in the possession of a consumer. - Page 8 208414, 208415 REPLACEMENT POWER SUPPLY KIT FOR ELECTRONIC AIR CLEANER Home and Building Control Home and Building Control Honeywell Inc. Honeywell Limited-Honeywell Limitée Honeywell Plaza 155 Gordon Baker Road P.O. Box 524 North York, Ontario Minneapolis, MN 55408-0524 M2H 3N7 69-1136—1...