Necessary Repairing Tools - Makita AC310H Technical Information

R
epair
CAUTION: Repair the machine in accordance with "Instruction manual" or "Safety instructions".

[1] NECESSARY REPAIRING TOOLS

Code No. Description
1R230 1/4" Hex. shank bit for M6
1R231 1/4" Hex. shank bit for M8
[2] REPLACING
[2]-1. Filter
1) Loosen five M5x10 Pan head screws, then remove Side panel with Side panel cover.
Fig. 1
2) Loosen three 4x18 Tapping screws, then remove Filter cover. (Fig. 2)
Filter can be removed as illustrated in Fig. 3.
Fig. 2
Filter cover
[2]-2. Filter
After removing Side panel with Side panel cover, loosen Cover of Check valve section with box wrench 19. (Fig. 4)
Check valve can be removed. (Fig. 5)
Fig. 4
Removing M6 Hex socket head bolt
Removing M8 Hex socket head bolt
Note: Do not loosen two M5x10
Pan head screws in two circles.
Remove five M5x10 Pan head screws
designated with arrows.
Side panel with Side panel cover
4x18 Tapping screw
(3pcs.)
Cover of Check valve section
Use for
M5x10 Pan head screw
Spring washer 5
Flat washer 5
Fig. 3
Fig. 5
Check valve
P 2/ 7
Filter
Cover of
Check valve section