Table of Contents
Advertisement
To select a mode, press the remote's ENTER key and use the
up and down arrows to select the proper mode. Pressing the
ENTER key one more time will instantly switch the device to that
mode. This may cause your screen to go completely black. In
this case, you will need to switch your TV or monitors TV source
or TV mode to component or composite connections (depending
on which mode was just selected).
Once the display is visible, you will need to press the 0 key on
the remote to verify that you can properly see the display.
NOTE: Pressing the VIDEO button on your remote control will
cycle through the four supported display modes.
47
Advertisement
Table of Contents
