Table of Contents
Advertisement
System Preferences:
Using the remote's control arrows, change the Screen Saver
Delay and Slideshow Delay to your desired settings. To change
a setting, please highlight the specific item and press the ENTER
key on your remote control. You can then increase or decrease
the value by using the up and down controls on the remote.
Once the value has been changed, press the ENTER button
again to lock in the setting.
Screen Saver Delay – This is the time of inactive use required
by the LinkTheater before it activates its internal screen saver.
The screen saver is used to protect your TV or monitor from
image burning. Some types of displays (specifically CRT tubes)
are especially easy to burn images into. It is recommended that
the screen saver be used when the LinkTheater is not being
used.
Slideshow Delay – This is the amount of time a picture or
graphics file will be displayed before the next file is displayed.
This amount of time is only pertinent when doing a slideshow of
multiple images.
30
Advertisement
Table of Contents
