Table of Contents
Advertisement
Unless the chosen network is open, you will need to enter the
encryption key (password) for the wireless network.
Input the WEP (hex) or WPA Personal (alphanumeric) key into
the key field. Highlight the key field, press the remote's ENTER
key, type the key in, and press ENTER again when finished.
Use the 0-9 keys in sequence to type numbers and letters into
the field (similar to how a cell phone works). For capital letters,
please cycle through the lower case and numbers first. The left
arrow key is used for backspace, the right arrow key for space.
Select Continue when done.
26
Advertisement
Table of Contents
