Sharp Zaurus SL-C3000 Instruction Manual page 53

my Zaurus SL-C3000 and SL-C3100
# ln -s /usr/lib/samba/smb.conf smb.conf
Once you install SambaController, you can use it to start and stop samba, as well as modify
smb.conf from the Configure tab.
You should also install smbpasswd [smbpasswd_0.1-1_arm.ipk] which will allow you to set the
samba password.
Once you installed smbpasswd, you will need to do the following to get it working:
# su
# ln -s /usr/local/samba/lib/codepages /usr/lib/samba/codepages
# rm /usr/local/samba/lib/smb.conf
# ln -s /usr/local/samba/lib/smb.conf /usr/lib/samba/smb.conf
# ln -s /usr/local/samba/private/smbpasswd /etc/smbpasswd
Note: you might need to hack the Windows registry to enable plain text password to make Windows
compatible with Samba (depends on the version of Windows you are running).
This configuration forces the samba user to be the zaurus. When giving access to the samba shares,
all the access rights and file permission is that of the zaurus user. This will work fine on all FAT
filesystems, however, if you change some of your partitions to ext2, then you might get some
permission denied errors when trying to acces, create, modify, move or delete files. If that
happens, make sure the file or directory in question has sufficient access rights for the zaurus user.
In addition, if you change /hdd3 to another filesystem other than fat, then samba will stop to work
for /hdd3/Documents unless you change /etc/hotplug/usbdstorage.agent and change the mount
options to the appropriate filesystem type, ie change fat to someting else like ext3.
Installing SSH
ssh client
If you only want to ssh to other machines from your Zaurus, install ssh client
[openssh-client_3.6.1p1_arm.ipk].
sshd
53 of 212
http://www.users.on.net/~hluc/myzaurus/
16/09/2007 12:23