Setting Up The Client Workstation; Install The Fax Printer Driver In Client Workstations - NEC NVM-2000 Installation Manual

Installing Fax Server

Setting Up the Client WorkStation

Setting Up the Client WorkStation
Setting Up the Client WorkStation
You must install a Fax Printer Driver and Fax Server Client software on each personal computer
that should have access to the Fax Server. The Fax Server software is on the Fax Server Distribution
1.02 CD-ROM. This CD contains installation files for client computers with Windows 95/98 and
files for client computers with Windows NT 4.0. Be sure you install the correct set of files on a par-
ticular client workstation.
Note:

Install the Fax Printer Driver in Client Workstations

The Fax Printer Driver is located on the Fax Server Distribution 1.02 CD. You must install the
Fax Printer Driver before you install the Fax Server client software.
You must close all programs before you begin the installation. This includes any e-
mail and any virus protection programs.
To install the Fax Printer Driver in a client workstation:
1.
2.
3.
4.
5.
6.
7.
6
The instructions in the following pages show screens as they appear in client workstation with
Windows 98. If you have Windows NT, your screens may be slightly different but will func-
tion identically.
Close all programs.
Insert the Fax Server Distribution 1.02 CD into the CD-ROM drive of the client computer.
Click Start Run.
Click Browse.
In the Browse window, click in the Look in box for the CD-ROM drive of the computer.
Double-click to open the file labeled Fax Server Distribution 1.02. Then double-click to
open the following subsequent file folders:
Cd
NTK
You will see two file folders that contain installation files for client computers with Windows
95/98 and files for client computers with Windows NT 4.0, as shown below.
Double-click to open the appropriate file folder for the computer on which you are installing
the software.
IMPORTANT
Issue 1-0