Frame Setup - Honeywell Fusion IV User Manual

Frame Setup

________________________________________________________________________________________________________
58
Frame Setup gives you the option to adjust both the resolution and the number of
images per second each camera will record. When setting up the Images Per Second
(IPS) sliders, the BLUE slider represents the frames at which the DVR will capture the
incoming video while the RED slider represents the frame rate that will be recorded.
This option is beneficial when higher frame rates are desired remotely. The Server will
only send out frames remotely that have been first encoded. For Ex. If the Blue
'ENCODING' option is set to 25 IPS and the Red 'RECORDING' option is set to 7 IPS
then the DVR Server will record 7 IPS and users viewing live video remotely will receive
25 IPS on that specific camera.
The Software will not allow the maximum available Frames to be exceeded.
Note
The RED IPS record slider cannot exceed the BLUE IPS capture slider.
Note
Frame Select Blue Slider: Sets the IPS recorded during intensive recording and
available for viewing on a remote client PC.
Red Slider: Sets the IPS recorded by the DVR during normal
recording.
Resolution Affects the total number of frames per second that are available.
Codec Select the appropriate codec for each camera.
CUBIC (MJPEG), MPEG-4, H.264
Video Quality Lower quality video has a smaller file size but appears more
pixilated.
Sensitivity Sets the Keyframe refresh rate. Adjusting this setting can have
negative effects on video quality.
Note Do not change the default setting unless instructed by a
system administrator.