Show Xconnect - Cisco ASR 901 Command Reference Manual

Chapter 1 CLI Command Reference

show xconnect

To display information about xconnect attachment circuits and pseudowires (PWs), use the show
xconnect all command in privileged EXEC mode.
Syntax Description all
interface
interface
peer ip-address
{all | vcid vcid}
detail
Command Modes
Privileged EXEC
Command History Release
15.1(2)SNG
Usage Guidelines
The show xconnect all command can be used to display, sort, and filter basic information about all
xconnect attachment circuits and PWs.
OL-26031-07
show xconnect {all | interface interface | peer ip-address {all | vcid vcid}} [detail]
Displays information about all xconnect attachment circuits and PWs.
Displays information about xconnect attachment circuits and PWs on the specified
interface. Valid values for the argument are as follows:
atm number—Displays xconnect information for a specific ATM interface or
•
subinterface.
atm number vp vpi-value—Displays virtual path (VP) xconnect information
•
for a specific ATM virtual path identifier (VPI). This command does not
display information about virtual connect (VC) xconnects using the specified
VPI.
atm number vp vpi-value/vci-value—Displays VC xconnect information for a
•
specific ATM VPI and virtual circuit identifier (VCI) combination.
serial number—Displays xconnect information for a specific serial interface.
•
serial number dlci-number—Displays xconnect information for a specific
•
Frame Relay data-link connection identifier (DLCI).
vlan vlan-number—Displays vlan-mode xconnect information for a specific
•
VLAN interface.
Displays information about xconnect attachment circuits and PWs associated with
the specified peer IP address.
• all—Displays all xconnect information associated with the specified peer IP
address.
vcid vcid—Displays xconnect information associated with the specified peer IP
•
address and the specified VC ID.
(Optional) Displays detailed information about the specified xconnect attachment
circuits and PWs.
Modification
Support for this command was introduced on the Cisco ASR 901 router.
Cisco ASR 901 Aggregation Services Router Command Reference Guide
show xconnect
1-189