Ql-Enabled Rep Segment - Cisco ASR 901 Command Reference Manual

ql-enabled rep segment

ql-enabled rep segment
Specifies the REP segment used for synchronous Ethernet clock selection.
Syntax Description
segment
segment-id
Defaults There is no default setting.
Command Modes
Global configuration
Command History Release
15.1(2)SNG
Usage Guidelines This command requires that you specify a synchronous Ethernet clock source.
Examples
The following example shows how to use the
Router# config t
Router(config)# ql-enabled rep segment 5
Router(config)# exit
Related Commands Command
rep segment
Cisco ASR 901 Aggregation Services Router Command Reference Guide
1-108
ql-enabled rep segment segment-id
no ql-enabled rep segment segment-id
Specifies a REP segment.
The REP segment ID of the REP segment
Modification
Support for this command was introduced on the Cisco ASR 901 router.
command:
ql-enabled
Description
Enables Resilient Ethernet Protocol (REP) on an interface assigns a
segment ID.
Chapter 1 CLI Command Reference
OL-26031-07