Operation - Makita 6908D Instruction Manual

OPERATION
Switch action
CAUTIO N :
Before inserting the battery cartridge into the tool, always check to see that the switch
To start the tool, simply pull the trigger.
Tool speed is increased by increasing pres-
sure on the trigger. Release the trigger to
stop.
Reversing switch action
CAUTl ON:
trigger actuates properly and returns to the "OFF" position when released.
Always check the direction of rotation before operation.
*Use the reversing switch only after the tool comes to a complete stop. Changing the
direction of rotation before the tool stops may damage the tool.
This tool has a reversing switch to change
the direction of rotation. Depress the re-
versing switch lever from the A side for
clockwise rotation or from the B side for
counterclockwise rotation. When the switch
lever is in the neutral position, the switch
trigger cannot be pulled.
I
Clockwise Counterclockwise
Installing set plate
Always install the set plate when using bat-
tery cartridges 91 00. Install the set plate on
the machine with the screw provided as
shown in Fig.
9