Makita 6908D Instruction Manual page 4

Specific Safety Rules
1.
Hold tool by insulated gripping surfaces when performing an operation where
the cutting tool may contact hidden wiring. Contact with a "live" wire
will
also make exposed metal parts
of
the tool "live" and shock the operator.
2.
Be aware that this tool is always in an operating condition, because it does
not have t o be plugged into an electrical outlet.
3.
Always be sure you have a firm footing.
Be sure no one is below when using the tool in high locations.
4. Hold the tool firmly.
5.
Wear ear protectors.
SYMBOLS
The followings show the symbols used for tool.
v
................................. volts
A .................................
amperes
Hz .................................
herts
kg ................................. kilograms
h ................................. hours
min
.................................
minutes
.................................
seconds
S
' L
.................................
alternating current
- .................................
direct current
_ _ _ _
n , .................................
no load speed
%
.................................
alternating or direct current
Class
II
Construction
A
.................................
splash-proof construction
b b
................................. watertight construction
...
/min
................................
revolutions or reciprocation per minute
@
.................................
number of blow
4