Table of Contents
Advertisement
Linksys
Privacy Mask Control
Privacy Mask - Remotely disables live view and recording. Configure the
privacy windows for up to three individual windows or for the full screen.
Preset Point
NOTE:
(Only available with models with a RS485 interface) – Preset Point
only works if a pan-tilt scanner is connected to the camera's RS485
interface. This feature can ONLY be displayed correctly on Internet
Explorer.
A preset position is a pre-defined camera view that can be used to quickly
move the camera view to a specific location.
How to create a preset position
1.
Use the Pan, Tilt and Zoom (PTZ) controls to steer the camera view to
the required position.
2.
Enter a position name and click Add.
3.
The camera position and focus settings will be saved as a preset position.
NOTE:
A total of sixteen preset positions can be set.
Preset positions can be accessed at any time by selecting the position's name
from the Preset Positions drop-down list. Set a Home position, which is readily
accessible by clicking the Home in the PTZ panel.
NOTE:
The name of the preset point set as Home will have (H) added; for
example, Gate (H).
The camera can be configured to return to the Home position when the camera
has been idle for a specified length of time. Select the desired length of time (in
minutes) from the drop-down menu and click Apply. Setting the time to zero
prevents the camera from automatically returning to the Home position.
Configuration
7
Hide quick links:
Advertisement
Table of Contents
