Live Viewing - Linksys LCAD03FLN User Manual

Linksys

Live Viewing

Live Viewing is the default page that opens when you access the camera. Live
video is displayed directly in the browser window.
Physical Details
Channels
The network camera offers simultaneous dual stream for optimized quality
and bandwidth. Go to Configuration → Camera/Video/Audio → Video to
configure the codec compression and video resolution or refer to the video
configuration page.
Protocol
HTTP - This unicast method can be used to traverse firewalls. Firewalls are
commonly configured to allow the HTTP protocol, thus allowing RTP to be
tunneled.
TCP - This protocol guarantees the complete delivery of streaming data and
provides better video quality. The downside of using this protocol is that the
quality of its real-time effect is less than that of the UDP protocol.
UDP - This protocol allows for more real-time audio and video streams.
However, network packets may be lost due to network burst traffic and
images may be broken. The UDP connection time-sensitive responses are
more important than video quality.
NOTE:
Camera Control Panel is only available when you are using
Windows Internet Explorer.
Camera Control Panel - Icons
/ Recording on/off - displays the status of the recording video.
/ MIC on /off - displays the status of the microphone volume.
/ Speaker on/off - displays the status of the speaker.
MD on/off - displays the status of Motion Detection.
/
Camera Control Panel - Buttons
Play or Stop - play or stop the video.
Recording - record video to a computer.
Snapshot - capture and save still images.
Digital Zoom - enable the zoom operation.
Mirror - horizontally reflect the live video display.
Flip - vertically reflect the live video display.
Real Size - toggle between real size and normal mode.
Full Screen - enable full screen mode; press the Esc key to return to normal mode.
Motion Detection - enable the motion detection alert function.
Mute - turn off the sound.
Default - restore default settings.
Live Viewing
2