Table of Contents
Advertisement
Linksys
How to create an event
1.
Click Add.
Click Enable.
2.
3.
Enter an event name.
4.
Set an event schedule to define when the event is activated.
5.
Select an event type that will be used to trigger the event.
NOTE:
The Motion Detection, Digital Input and Audio Detection settings
can be configured in camera Web configuration.
6.
Select an action for the camera to perform when an event occurs.
Click Apply. The new event will appear on the event list above.
7.
How to configure motion detection
1
Select <Window1>, <Window2>, or <Window3> to adjust the motion
detection window.
2.
Use the mouse to resize or move the motion detection window.
3.
Adjust the sensitivity level. Lower sensitivity levels will result in more
activity needed to trigger an event.
4.
Adjust the threshold to change the threshold level. The higher the
threshold, the larger objects need to be to trigger an event.
5.
The chart below the Live View window indicates the activity level of
the Motion Detection window. When motion is detected by the camera
and exceeds the defined threshold, a red bar will appear.
6.
Click Apply.
Digital Input
This feature allows the camera to receive input from an external device through
DI/DO socket.
NOTE:
This feature is only available with models with a DI/DO interface.
Digital Input - Set a triggering voltage level. This option should be selected
according to the capability of your external device.
Audio Detection
Schedule an event to be triggered if there is a change in the sound level of
a monitored area. Audio detection can be used to measure change in the
ambient voice. Select the sensitivity from the drop-down menu.
Sensitivity - Adjust the sensitivity of the sound level from 10 - 100%. The
default sensitivity is 50%.
Current Detected Value - Display the current sound level.
Configuration
12
Hide quick links:
Advertisement
Table of Contents
