Delete A Personal Outgoing Message; Remote Access; Access The Answering Machine Remotely - AEG Solo Combo 15 User Manual

Press to select "ANSWER ONLY" or "ANSW.&RECORD" and then press
Press to select "PLAY".
>The outgoing message plays through the phone's speaker.
>Press if you wish to listen to the outgoing message privately over the earpiece.
Press to return to standby mode.
16.6.3

Delete a Personal Outgoing Message

If you want to return to using the default OGM, simply delete your personal OGM.
Using a cordless handset, from the home screen, press
Press to "ANSW MACHINE" and then press
Press to "RECORD OGM" and then press
Press to select "ANSWER ONLY" or "ANSW.&RECORD" and then press
Press to "DELETE" and press
>The default pre-recorded outgoing message is played.
Press to return to standby mode.
16.7

Remote Access

The phone lets you listen to the messages on your answering machine, or otherwise operate your
answering machine by calling in to your answering machine from another touch-tone phone. You need
to enter a remote access code (same as your Master PIN) to access your answering machine remotely.
The remote access code is used to prevent unauthorised access of your answering machine.
Remote Access must be enabled if you want to use this feature.
16.7.1

Access the Answering Machine Remotely

Dial your phone number from any touch-tone phone.
When your answering machine answers your call and starts playing your outgoing message, press
the key.
>The outgoing message will stop playing.
Enter your Remote Access Code (same as your Master PIN code) within 8 seconds using the numeric
keypad on the touch-tone phone.
>Note that the answering machine will drop the call if you do not enter the Master PIN within 8
seconds.
If the code is accepted, you will hear a confirmation tone.
The answering machine will start to playback all the messages on your answering machine, beginning
with new messages, or if there are no messages you will hear four beeps.
Use the keypad on the touch-tone phone to carry out the following operations:
Repeat the previous message.
1
Start playing messages, or repeat the current message from the beginning.
2
Skip to the next message.
3
Delete the current message.
6
Turn on the answering machine in "ANSW. &RECORD" mode.
7
.
to select.
to select.
to confirm.
31
to confirm.
to confirm.