Transfer An External Call From The Corded Base To A Cordless Handset; Initiate A Conference Call During A Call On The Corded Base; Call From The Redial List; Store A Pre-Dial Number To The Phonebook On The Corded Base - AEG Solo Combo 15 User Manual

14
Press at the bottom of the corded base to put the intercom call on hold and answer the incoming
call. Then you can press and hold
can end the call on the corded handset, which will transfer the incoming call to the other intercom
handset.
9.10

Transfer an External Call from the Corded Base to a Cordless Handset

During the call, press
> Intercom is established immediately with all registered cordless handsets.
Note:
If there is no answer from the cordless handset, or you wish to cancel the intercom call before it is
answered, press at the bottom of the corded base to return to the external call.
Press on the cordless handset to answer the internal call, where both internal callers can talk.
Return the corded handset to the corded base or press to transfer the external call to the cordless
handset.
9.11

Initiate a Conference Call during a Call on the Corded Base

You can establish a 3-way conference by inviting another cordless handset to join in a conference call
with you and the external caller.
During the call, press
>Intercom ringing starts immediately with all registered cordless handsets.
Note:
If there is no answer from the cordless handset, or you wish to cancel the intercom call before it is
answered, press at the bottom of the corded base to return to the external call.
Press on the cordless handset to answer the internal call, where both internal callers can talk.
When the intercom call is connected, press and hold
seconds to connect the call in conference mode.
9.12

Call from the Redial List

The corded base stores only the last number dialled.
In standby mode, press
>The last number dialled is displayed.
Press or lift up the handset from the corded base.
>The number will be dialled out automatically.
9.13

Store a pre-dial number to the Phonebook on the Corded Base

In standby mode, enter the pre-dial number.
Press and hold .
>The pre-dial number is displayed.
Press to save the pre-dial number into the phonebook.
>A confirmation tone is played and the corded base returns to standby mode.
9.14 Store a number from the Redial List to the Phonebook on the Corded Base
In standby mode, press
>The last number dialled is displayed.
Press and hold .
to set up a conference call between all three parties, or you
at the bottom of the corded base to put the external call on hold.
at the bottom of the corded base to put the external call on hold.
on the corded base.
on the corded base.
at the bottom of the corded base for 2 - 3