Makita AG125 Instruction Manual page 8

When the air hose is connected, do not carry the
tool with your finger on the trigger or hand it to
someone in this condition. Accidental firing can
be extremely dangerous.
I
Handle the tool carefully as there is high pressure
inside the tool that can be dangerous if a crack
is caused by rough handling (dropping or strik-
ing). Do not attempt to carve or engrave on the
tool.
Stop nailing operations immediately if you notice
something wrong or out of the ordinary with the
tool.
*Always disconnect the air hose and remove the
nail:
1.
When unattended.
2. Before performing any maintenance or repair.
3. Before cleaning a jam.
4. Before moving the tool to a new location.
8