Honeywell CL15AM Owner's Manual page 14

CLEANING & MAINTENANCE
DRAINING AND CLEANING THE WATER TANK
•
Turn the power "off" and disconnect the air cooler from the
power supply.
•
Move the unit to a location where it can be drained.
•
Remove the cap from the water drain plug and allow the
tank to empty (see parts description on page 7).
•
Refill the water tank with clean water and drain it
completely.
•
Refill the water tank with clean water, up to the maximum
level.
•
Plug into the power supply and turn on unit.
CLEANING THE HONEYCOMB FILTER
•
Turn off the unit, and unplug the power cord from wall
outlet.
•
Rotate the unit facing the back panel, and locate the Rear
Grill Removal Screws (refer page 7., #17). Remove both
the screws with a screw driver.
•
Pull the rear grill panel upwards, untill it is completely
removed.
•
Now, the Honeycomb filter can be seen. Clean the filter with
clean cloth to remove all the dust & dirt particles.
•
Once the cleaning has been completed, assemble the unit
as described above.
•
Plug into the power supply and turn on unit.
The air cooler is now ready to be used. This cleaning process should be repeated weekly to
maintain the integrity of the unit and to remove particles filtered from the air.
12
Water Drain Plug
Rear Grill Removal Screws